Cobra CJI 150 Instrukcje Operacyjne Pobierz pdf (Strona 14)

Operation

CAUTION: Read all operating instructions before operating the power pack.

The power pack is not intended for use as a UPS (Uninterruptible Power

Supply). The unit should be operated only in locations that meet the

following requirements:

Dry Don’t allow water or other liquids to drop or splash on the unit.

Cool Ambient air temperature should be between -10° and 40° C

(14° and 104° F) – the cooler the better within this range.

Ventilated Leave at least 2” (5 cm) clearance around the unit for air flow.

Ensure that the ventilation openings are not obstructed.

Safe Do not operate the unit in the same compartment as batteries

or in any compartment capable of storing flammable liquids

like gasoline.

Protect from Do not operate the unit where it will be exposed to battery

battery gases gases. These gases are very corrosive and prolonged exposure

will damage the power pack

AC appliances

The power pack has one grounded AC power outlet for use with AC

appliance. You can either plug the appliance directly into the AC outlet or you

can use an AC power bar to increase the number of outlets available.

However, for continuous operations, the combined loads must be less than

80W. The less wattage used, the longer the power pack will operate before

recharging is required.

Operating range:

• 80 watts or less for continuous operation

• 100 watts for 5-minute operation

Some appliance may be difficult or impossible to operate from the power

pack. They may have high surge requirements or may be incompatible with

the output waveform of the power pack. See “High Surge Appliances” and

“Trouble Appliances” (page 10).

NOTE: To determine required wattage for a device, look up required Amps a

device is rated. This Amperage is found on device I.D. tag in back of the unit.

Multiply Amps X Volts = Watts.

1 2 ... 9 10 11 12 13 14 15 16 17 18 19 ... 22 23

Brak uwag

Cobra CJI 150 Instrukcje Operacyjne Strona 14