Cobra MPC SERIES Instrukcja Użytkownika Pobierz pdf (Strona 6)

SPECIAL PROGRAMMING SECTION:

1. INITIALIZE LOCK. Initializing the lock with a unique

6-digit code assigns a LOCK ID number to each speciﬁc

lock. Using keypad, enter the FACTORY CODE 9991234, the

#key, and the 6-digit LOCK ID (usually starting with 000001),

and ﬁnally, the #key. This code will NOT open the lock.

2. Create GREAT GRAND MASTER (GGM). This code

is required by the SYSTEM MANAGER to perform

all programming functions. In any lock system, the

number of digits used for the UID of each User must be the

same. Example: If the UID is 3 digits, all Users must have a 3

digit UID code. Also, the number of digits used for the PIN of each User must be the

same.

Example: If the GGM’s PIN is 5 digits, all Users must have a 5-digit PIN code.

Using keypad, enter the FACTORY CODE 9991234, the * key, the UID of the

system manager (either 2,3 or 4 digits), the #key, the PIN of the system manager

(either 3,4,5 or 6 digits), and ﬁnally, the #key.

Factory Code * UID (2, 3 or 4 digits) PIN (3, 4, 5 or 6 digits) #

9-9-9-1-2-3-4 * 1-2-3 # 1-2-3-4-5 #

The GGM is now established for the SYSTEM MANAGER only a combination of

their UID followed by their PIN. Lock is now initialized.

System Manager’s Access to the Lock: Enter UID plus PIN, then the *key. Example:

1-2-3-1-2-3-4-5 *, GGM *.

Function 01, Adding & Deleting User Codes. Min. Group Number 03

To Add Users: Enter YOUR CODE (UID and PIN), the #key, FUNCTION NUMBER (01),

the * key, the Users UID you want to include in the GROUP, the * key, the 2 digit

GROUP NUMBER, the * key, the User’s PIN, the * key twice.

Example: 1-2-3-1-2-3-4-5 # (your code), followed by 01 * (function #), 678 * (UID), 04 *

(Group number), 5678 * (PIN), *

To Delete Users: Enter YOUR CODE (UID and PIN), the #key, FUNCTION NUMBER (01),

the *key, the Users UID you want to delete, the *key, the 0 key in place of the GROUP

NO., the *key twice.

Example: 1-2-3-1-2-3-4-5 #, 01*, 678*, 0* *

The System Manager Code establishes the GGM and performs all programming

functions.Higher Groups can override access functions of lower Groups.

All Users must be assigned to a Group. Each assigned Group can have different

User restrictions.

When programming a Marks i-Que Metro, important keys are:

TERMINATOR KEY (*): Acts like the “Enter” key on a computer and is used to

add or conﬁrm codes on the keypad.

PROGRAMMING KEY (#): After a valid PROGRAMMING CODE is entered, this key is

depressed to enter the programming mode. This key can also be used as a time saving

feature, allowing the entry of multiple functions.

At the end of any PROGRAMMING INSTRUCTION, replace the last * with a # to

return to FUNCTION NUMBER input, eliminating the need to reenter YOUR CODE.

RESET PROGRAMMING TO FACTORY DEFAULT:

Unplug battery pack. Find black and yellow wire connector. Make wire “U” and

insert into connector. Plug in battery pack, LED red then green. Lock should

relock. Remove “U” wire. Re-assemble lock.

Categories Metro

ANSI/BHMA A156.2

Grade Certification

Grade 1

UL/ULC fire rating ‘A’ Label doors

Clutched Lever Yes

Cylindrical or

mortise?

Cylindrical/Mortise, Exit

Trim/Tubular

Lever Handing non-handed

field reversible? Yes

Key Override Yes

Optional No

Keypad Type 16 buttons

123i, 456Q, 789u, *0#e

Button Construction flush or tactile metal

Code Hierarchy System Manager/GGM,

Choice of lower levels,

User Codes

Master Code Great Grand Master

(GGM) Code

# Characters 5-10, Combination of

UID + PIN

Factory Default 9991234, Factory Code

becomes GGM

Sub-master Codes # “GM” “M”

# Characters Same as the GGM

User Codes up to 32

# Characters Same as the GGM

Single use code No

Successful Entry Green LED, 1 sec

double beep

User code groups Up to 99, Users in the

same group have same

access rights

Levels of access Passage, Code

Required, Multiple

Code Entry, Deny

Access by Group

Lock-out/down

Overridden by Master Code

Programming

Capabilities

System Manager

program only, “GGM”,

“GM”, “M” no change

own UID

Codes on hold Deny Access

Anti-Tamper 3 wrong codes,

keypad locked out

for 20 seconds, then

increases to 40

Battery Life 80,000 to 90,000

operations

Low Battery Warning First stage: double beep

& yellow LED when

code entered

Second stage: adds a

double beep every hour

till batteries fail.

Batteries 4 AA Alkaline

Battery Location Interior battery cover

Battery Replacement Must be replaced

within 10 minutes or

memory affected

MARKS I-QUE METRO

52 — LOCKSMITH LEDGER [11/10] www.locksmithledger.com

1 2 3 4 5 6 7 8 9 10

Komentarze do niniejszej Instrukcji

Brak uwag

Cobra MPC SERIES Instrukcja Użytkownika Strona 6

Komentarze do niniejszej Instrukcji