Cobra MPC SERIES Instrukcja Użytkownika Pobierz pdf (Strona 7)

SPECIAL PROGRAMMING SECTION:

argent KP Lock factory Master

Code is “1234”. Entering 1234*

unlocks and allows lever to retract

latchbolt.

All of the following procedures start

with 99# to enter programming mode.

Change Master Code: 1234* (Yellow LED

Begins to Blink Slowly). This example uses

the Factory Default Master Code

50# 1# 01# New Master Code*

(Yellow LED Blinks Quickly) .

New Master Code* (Yellow LED

Blinks Slowly) *(Yellow LED Goes Out)

Enter Emergency Code: (Unlock Duration

Factory Set at 10 Sec)

Master Code* (Yellow LED begins to

blink slowly)

50# 1# 02# Emergency Code* (Yellow

LED blinks quickly)

Emergency Code* (Yellow LED Blinks

Slowly) * (Yellow LED goes out)

Enter Supervisory Code: Master Code*

(Yellow LED begins to blink slowly)

50# 1# 03# Super visory Code*

(Yellow LED blinks quickly)

Supervisory Code* (Yellow LED Blinks

Slowly) *(Yellow LED goes out)

Enter User Code: Supervisory or Master

Code* (Yellow LED begins to blink slowly)

50# 1# User Number (04-97)# User

Code* (Yellow LED blinks quickly)

User Code* (Yellow LED blinks

slowly)* (Yellow LED goes out)

Enter Passage (Maintained Mode) Code:

Supervisory or Master Code* (Yellow LED

Begins to blink slowly)

50# 2# User Number (04-97)# User

Code* (Yellow LED blinks quickly)

User Code* (Yellow LED Blinks

Slowly)* (Yellow LED goes out)

Enter One-Time User Code: Supervisory or

Master Code* (Yellow LED begins to blink

slowly)

50# 3# User Number# User Code*

(Yellow LED blinks quickly)

User Code* (Yellow LED Blinks

Slowly) * (Yellow LED goes out)

Clear Entire Memory: Master Code* (Yellow

LED Begins to Blink Slowly)

46# 00000# 00000# (Yellow LED

Continues to Blink Slowly)

* (Yellow LED Blinks Quickly)

* (No Beep on Depression and Yellow

LED Goes Out)

PAUSE, Yellow LED Begins to Blink

Again

* (Yellow LED Goes Out)

Note: This deletes ALL codes, includ-

ing Master, Emergency and Supervisory.

Master Code is set back to 1234, Door

Number to 0001 and Unlock time 5 Sec.

If the Master Code is unknown, Factory

Assistance will be required to clear the

memory. Call 1-800-810-WIRE

Categories Sargent KP

ANSI/BHMA A156.2 Grade 1

Lock Cylinder Grade

UL/ULC fire rating 3 hour ‘A’ label doors

Clutched Lever n/a

Available as Cylindrical, Mortise or Exit Device Trim

Lever Handing Some non-Handed

Field Reversible? Yes

Key Override Yes

Optional No

Keypad Layout Telephone-Style 12-button

Button Construction ultraviolet stable textured material

Code Hierarchy Master, Emergency, Supervisor, Users

Master Code # Digits 2-6,

Notes: Can repeat numbers or start

with “0”.

Yellow indicates programming

Factory Default Master 1-2-3-4

Notes: Only Master code deletes Users.

Sub-master Codes # 1 Emergency, 1 Supervisor

Number Of Digits 2-6

User Codes no. up to 96

# of digits 1-6

Notes: Can be different lengths, Can repeat numbers. Two User Codes have 10 sec open

time (98, 99)

Single use code Up to 96

Successful Entry Green LED, pasage mode, flashing green LED

User code groups n/a

Notes: When Passage Mode is activated, same User Code must be used to re-lock Lock.

Levels of access Code required, passage

Programming Capabilities Master Code: all, Emergency Code :10 second

unlock time

Supervisor Code limited, No Users deleted by Supervisor Code

Codes on hold Temporary Lockout

Anti-Tamper 3 wrong codes in succession disables all codes

for 10 seconds

Battery Life Minimum 40,000 cycles

Low Batteries Warning Four chirps after each code entry

Batteries Four “C”

Battery Location Inside of Battery cover, secured with 8-32 hex

head security screw

Battery Information Warnings Non-volatile solid state memory

Notes: If a mistake is made during any programming procedure, depress the “*”

several times until the yellow LED goes out. If no keystroke is made in a 30 seconds, the

unfinished programming up to that point will default and you will have to start over. If

after the last “*” is depressed, the yellow LED does not go out, depress “*” once more.

SARGENT KP LOCK

54 — LOCKSMITH LEDGER [11/10] www.locksmithledger.com

1 2 3 4 5 6 7 8 9 10

Komentarze do niniejszej Instrukcji

Brak uwag

Cobra MPC SERIES Instrukcja Użytkownika Strona 7

Komentarze do niniejszej Instrukcji